See what our Experts say about this Stealth Hitches Accessories and Parts

• Trailer Hitch Availability for 2020 Subaru Outback Wagon
  For your 2020 Subaru Outback Wagon we have two trailer hitch options at this time (December 2019). However, a trailer hitch designed to fit the frame of a 2019 Outback Wagon, like # 75673, will not fit the frame of your 2020 model. If you plan on only using the hitch for non-trailer loads, like a hitch mounted bike rack or cargo carrier, you will want to go with the Stealth Hitches Rack Receiver # 391SUOB20. To tow a trailer, you will need to use the Stealth Hitches Tow Package # 391SUOB20T...
  view full answer...
  
• Comparing Stealth Hitches for 2020 Subaru Outback
  The difference between the Stealth trailer hitches for the 2020 Subaru Outback is simply that one is used for accessories like a bike rack, while the other is designed for towing a trailer. The Stealth Hitches Rack Receiver # 391SUOB20 comes with a 2 inch receiver which is only to be used for accessories. The receiver (pictured) cannot be used for towing, it is for people who want a hitch to use with a bike rack like the Hollywood Racks Trail Rider 2-Bike Platform Rack # HR200Z. If you...
  view full answer...
  
• Can Third Brake Light Be Added to Trailer Wiring
  Trailer wiring does not use a dedicated stop light. The brake lights are integrated into the same circuit as the turn signals which is a very common setup found on vehicles and 99.9% of the trailers you see on the road. All you need in order to add a third brake light to your trailer is the Pacer Performance 3rd Brake Light Logic Module # PP20-702 which you'd wire into the trailer wiring to give you the dedicated circuit and a light. For this I highly recommend the Optronics Streamline...
  view full answer...
• Recommended Hidden Trailer Hitch for a 2020 Subaru Outback Wagon
  The trailer hitch I recommend for a 2020 Subaru Outback Wagon is the Stealth Hitches Rack Receiver part # 391SUOB20 which once installed will be completely hidden behind the rear bumper therefore you will retain the same factory appearance as the vehicle would have had once rolled off the showroom floor. The Stealth Hitches Rack Receiver is a direct bolt-on fit with no drilling required. However, you will need to remove the rear bumper fascia but this only needs to be done once whereas...
  view full answer...
  
• Comparing Stealth Trailer Hitches for a 2021 Subaru Outback
  There are two Stealth Trailer Hitch options for a 2021 Subaru Outback, the Rack Receiver part # 391SUOB20 and Towing Receiver part # 391SUOB20T. The Rack Receiver is designed only for hitch mounted accessories like bike racks and cargo carriers. The Towing Receiver is designed to be used for towing; it comes with the ball mount, hitch ball, and wiring which is everything you need to tow. It also comes with a Rack Receiver if you need to use hitch mounted accessories as well. If you purchase...
  view full answer...
• Does Wiring Harness Come Separate or With Stealth Hitch for 2020 Subaru Outback
  You can choose to get the Stealth Hitch with the wiring harness, ball mount and hitch in one package for your 2020 Subaru Outback Wagon. For that you need the Stealth Hitches Hidden Trailer Hitch Receiver with Towing Kit # 391SUOB20T. Alternatively, if you already had the Stealth Hitches Hidden Rack Receiver # 391SUOB20 and wanted to add the ball mount and wiring harness you could do so with the Towing Kit with Ball Mount and Trailer Wiring # 391CONVOC3. I have added links to the installation...
  view full answer...
• Stealth Hitch For A 2024 Subaru Outback And Potential Installers
  Hello Jacob, thanks for reaching out. The Stealth Hitch # 391SUOB20 is what I recommend for your 2024 Subaru Outback. We do have quite a few installers in your area. I recommend either SCHWARTZ INDY in Noblesville, or WAYMIRE'S AUTO PARTS & SERVICE in Indianapolis. If you scroll down to the "featured help information" section below, you will see a link to our installer locator. Just enter your zip code and you will see the full list of installers in your area. Keep in mind that the Stealth...
  view full answer...
• Replacement for Stealth Hitches Ball Mount for 2020 Subaru Outback Wagon
  The # 391SUOB20T you purchased comes with the Towing Kit w/ Ball Mount and Trailer Wiring # 391CONVOC3. The 2" receiver # 391RR2 is the only option for a receiver, and none of them are rated for towing. You have to use the Stealth Hitches ball mount that came with the hitch if you want to tow. If you have lost the ball mount, you can replace it with the Ball Mount for Stealth Hitches Hidden Receiver Hitch # 391BMU3S. You will also need a hitch ball with a 1" diameter shank. You can use...
  view full answer...
• How to Tow Trailer with Stealth Hitch on 2020 Subaru Outback Wagon
  You are correct. The 2" receiver piece included with the Stealth Hitch # 391SUOB20 for your 2020 Subaru Outback Wagon should only be used for hitch-mounted accessories like a bike rack or cargo carrier. The receiver simply isn't designed to pull a trailer, no matter the weight, and isn't tested for this application. If you already have this hitch installed you can add the Ball Mount Towing Package # 391CONVOC3 that will let you pull a trailer. This kit includes the needed ball mount piece...
  view full answer...
• Hitch Recommendation for 2020 Subaru Outback for Bike Rack
  As the 2020 model is the first year of the 6th generation of the Subaru Outback Wagon, most of our hitch manufacturer's hitch fits are still in development and aren't available yet. Stealth Hitches does offer a fit, part # 391SUOB20. The hitch features a receiver tube that's removable, which makes the hitch disappear when it's detached. The hitch is perfectly suited for carrying a bike rack. Weighing a little above 35 lbs, the hitch is only about 5 lbs heavier than the typical hitch for...
  view full answer...

Do you have a question about this Accessories and Part?